trevato/arm
Public: anyone can read this; the crew can change it.
Migrated from github.com/Trevato/SO-ARM100
workbenchthis machine
- Grow light schedule: a switch driver (smart plug, GPIO relay, or uhubctl only when it switches the light alone) with a photoperiod that runs on the Pi
- Grow care: a plant profile (spinach first), reminders from it, a log book, and metrics with target bands; manual now, sensors later
- Grow card: "Camera can't see the plants" hint when the camera's region is mostly blown out or black (split from #584)
- Pump: an interval-cycle schedule on the Switch interface (with #585)
- The identity line on /story and /admin/data
- The workshop: one Pi, several stations (the arm and the grow box), each with cameras and controls; works with the arm unplugged
- Grow cameras: a saved camera profile per Pi camera, re-applied at every start, and a Tune panel with the box drawn once and colour correction under grow light
- Sign out, and every page shows who you are, even when the arm is off
- Closing the arm locks its owner out: keep sign-in and /admin working while closed, an Open now button on the resting card, and so101 open/close
- setup: find LeRobot calibration in its nested folders (calibration/robots/so_follower/*.json)
- `so101 setup` finds both arms, asks you to wiggle the leader, reuses existing calibration, then starts teleop
- `so101 teleop` drives the follower from the leader in one process at 60 Hz, with a joint table, lag and space to STOP
- The so101 CLI runs under Node: `node bin/so101 --help` and `ports` no longer reach bun:sqlite
- Open / Closed: the owner can close the arm, and a resting card tells visitors why (and when it is back)
- The story page: an engaging write-up of the arm for anyone, with the Hugging Face SO-101 docs and the public repo
- stack streams on larger view
- The intent hold falls back to the arm's real settle time (1 s, not 2 s) when the motion gives no duration; arrival stays at 12 ticks or less
- A session in /admin/data shows its joint traces, intent against actual, with jam, block, STOP and release marks on the same axis
- /admin/data's Health section charts Pi temperature, with under-voltage minutes marked on the same axis
- /admin/data draws the facts: overview strip, precision, latency, people and health charts, worst sessions, on phone, tablet and desktop
- jam-stream.test.ts judges 'jams within 500 ms' on the readings' own clock, not the test machine's wall clock, so a loaded full run no longer fails it
- The arm server writes settings.servoGains to the servos at start and when a silent servo answers again, only where registers differ
- When a turn ends, the relay fetches its trace from GET /precision/trace and stores it with the turn in facts (capped, gone at 90 days)
new above
offline